Shields

PinLock® Ready FliteShield™

PinLock® Ready FliteShield™ - Dark Smoke

$40 Suggested Retail USD

With the idea of creating a versatile anti-fog solution, we collaborated closely with Pinlock® to integrate their system to our Pinlock® Ready FliteShield™, allowing the Pinlock® shield insert to be installed or changed seamlessly.The Pinlock® Pins that are integrated to Pinlock® Ready FliteShield™ are designed to be eccentric, allowing riders to adjust the tension of their Pinlock® insert lenses, that increases the grip of the silicone seal on the Pinlock® visor to the helmet visor.

Buy local Buy online
Colors

Care Instructions

Replacement Parts

    Product Manual

    PinLock® Ready FliteShield™
    • Color
    • One Size
    • Clear
    • One Size 0130-0860
    • Light Smoke
    • One Size 0130-0861
    • Dark Smoke
    • One Size 0130-0862
    • RST Silver
    • One Size 0130-0863

    Installation Instructions

    Step 1.

    The Pinlock® Ready Icon Fliteshield™ works in conjunction with the Pinlock® Icon Fliteshield™ Insert Lens (Sold Separately) available in Clear, Dark Smoke, and ProtecTint™. See your helmet manual for shield installation instructions.

    Step 2.

    Remove the helmet shield from the helmet. Flex the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield. Once installed, remove protective film.

    Step 3.

    Inspect the silicon seal on the Pinlock® lens. It must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens. If correct, re-install your helmet shield.

    Step 4.

    If the silicon seal does not make full contact with the helmet shield you can adjust the pressure by turning the outside screw counter clockwise using the outside arrow in the pin for reference. Once finished, re-install your shield.

    Angled for Attack

    Featuring the Airframe Pro Helmet
    Watch The Video

    Old Ghost

    1984 GPZ900r
    Explore The Bike