Shields
PinLock® Ready ProShield
PinLock® Ready ProShield - Clear
With the idea of creating a versatile anti-fog solution, we collaborated closely with Pinlock® to integrate their system to our Pinlock® Ready Optics Shield, allowing the Pinlock® sheild insert to be installed or changed seamlessly. The Pinlock® Pins that are integrated to Pinlock® Ready Optics Shield are designed to be eccentric, allowing riders to adjust the tension of their Pinlock® insert lenses, that increases the grip of the silicone seal on the Pinlock® visor to the helmet visor.
Installation Instructions
Step 1.
The Pinlock® Ready ProShield works in conjunction with the Pinlock® ProShield Insert Lens (Sold Separately) available in Clear and ProtecTint™.
Step 2.
Remove the helmet shield from the helmet. Flex the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield. Once installed, remove protective film.
Step 3.
Inspect the silicon seal on the Pinlock® lens. It must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens. If correct, re-install your helmet shield.
Step 4.
If the silicon seal does not make full contact with the helmet shield you can adjust the pressure by turning the outside screw counter clockwise using the outside arrow in the pin for reference. Once finished, re-install your shield.