Shields
PinLock® Variant Precision Optics Insert Lens
PinLock® Variant Precision Optics Insert Lens - ProtecTint™
Clear and Dark Smoke Lenses - The Pinlock® visor insert is made out
of a material that contains moisture absorbing properties, which reacts
like a sponge and absorbs moisture effectively. The inner part of the
Pinlock® is lined with a silicon bead, which creates a double glazed
window type of effect when the Pinlock® visor insert is attached to the
helmet visor. The pocket of air that is trapped in between the visors
acts as an insulator for the inside temperatures in the motorcycle
helmet. Efficient absorption properties combined with the double glazed
like feature, the Pinlock® visor insert is the most effective, durable
and affordable anti-fog solution on the market.
ProtecTint™ - From
clear to light smoke in a matter of seconds. The Pinlock® ProtecTINT™ insert lens react to UV light by darkening its tint color automatically
while keeping your helmet face shield fog-free at the same time.
Installation Instructions
Step 1.
The Pinlock® Variant Precision Optics Insert Lens only works with Pinlock® Ready Variant Precision Optics Shield (Sold Separately) available in Clear, Dark Smoke, and RST Silver.
Step 2.
Remove the helmet shield from the helmet. Flex the helmet shield and place the Pinlock® lens between the two pins provided in the helmet shield. Once installed, remove protective film.
Step 3.
Inspect the silicon seal on the Pinlock® lens. It must make full contact with the helmet shield in order to avoid any condensation forming between the helmet shield and the Pinlock® lens. If correct, re-install your helmet shield.
Step 4.
If the silicon seal does not make full contact with the helmet shield you can adjust the pressure by turning the outside screw counter clockwise using the outside arrow in the pin for reference. Once finished, re-install your shield.